Programmable Angle Sensors


Programmable Angle Sensors

Programmable angle sensors are one of the products we can offer at Variohm, other terms for these sensors are; rotary sensors or rotary encoders.

Many of our programmable angle sensors have been designed within our facility, and use Hall Effect technology, this means that their working principle utilises a device (Hall Effect Chip) to measure the direction of the magnetic field.

An output is produced when the device senses a  radial directional change of this magnetic field, which is then translated into a proportional angular movement. Common output signals that we offer are 0-5V Analog Ratiometric and PWM. Future developments include additional outputs such as 0-10V and 4-20mA.

They may be fully customised to suit different applications so please contact us to discuss options.

Features of our Programmable Angle Sensors

Our programmable angle sensors typically have the following features;

  • Long life
  • Extremely robust
  • Redundant output
  • Customisable housings / Shafts
  • Programmable angles from 30° - 360°
  • IP protection ratings (see data sheets for full details)

or applications where space is very limited, we have a new range of micro programmable angle sensors - the CMRx range.

  • Euro CMRT – Shafted sensor with a mounting thread
  • Euro CMRK - two part puck sensor
  • Euro CMRS - Shafted sensor with a flange mounting

Each of these three sensors have programmable angles and can be manufactured to have a body diameter of 10mm and 12mm (dependant on sensor), which is the smallest currently available on the market for their mounting type. They are based on our well proven Euro XP range, also featuring programmable angles.

Our programmable angle sensors use Hall Effect technology which is non-contacting; this gives our sensors long life with a typical life in excess of 50 million cycles.

Why use a Programmable Angle Sensor?

Our programmable angle sensors grant the user ability for straight forward customisation to exactly match installation requirements. The angle in our sensors can be programmed from 30° to 360° in 1° increments. This ensures that no measurement is compromised.

Typical Applications for Programmable Angle Sensors

Angle sensors are often used within the following applications;

  • Wind direction measurement
  • CCTV – measuring the angle of the camera
  • Steering angle measurement
  • Pedal and throttle measurement
  • Rudder reference – for steering marine vehicles
  • Boom & slew angle measurement
  • Joystick and hand controllers
  • Active Aerodynamics

To discuss your requirements please contact us - +44(0)1327 351004 or sales@variohm.com

For more information please contact: Email: sales@variohm.com Tel:+44 (0) 1327 351004 Fax: +44 (0) 1327 353564


Article date: 11 / Jul / 2019

Programmable Angle Sensors

Published by: Variohm EuroSensor

Share this on Social Media

See these products...

Variohm account
Northampton Business AwardsInvestors in PeopleURSURSVARIOHM HOLDINGS

From 20th January 2017 Variohm Eurosensor Ltd  is part of the discoverIE plc Group of companies

Variohm EuroSensor,Williams' Barn, Tiffield Road,Towcester, Northants NN12 6HP.

Tel: +44 (0) 1327 351004.
Fax: +44 (0) 1327 353564.

Site © Copyright Variohm EuroSensor 2019.
Sitemap
. Conditions of Sale. Privacy Policy
Site by The Website Business